English
العربية
Suzuki GSX-R 600 750 Power Commander V
821.75 د.إ
The Dynojet Power Commander is the most well known fuel controller on the market, thanks to its capabilities and versatility. Take a look around the paddock at a track day, club racing event or AMA event, you will see the Power Commander V dominating the field.
Estimated Delivery: Mon, 02 Feb 2026 - Thu, 05 Feb 2026- Reduced size from PCIIIusb (less than half of the size of PCIII).
- USB powered from computer (9 volt adapter is no longer needed for programming).
- 2 position map switching function built in (map switch not included).
- Gear input (allows for map adjustment based on gear and speed).
- Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature).
- With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
- Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes.
- 10 throttle position columns (up from 9 on PCIIIusb).
- Enhanced “accelerator pump” utility (increased adjustment and sensitivity ranges).
- Can be paired with expansion module such as AutoTune, ignition module & quick shifter from Dynojet.
Fits: Suzuki GSXR 600 750 2011+.
Condition: Used.
Related Products
MWR Racing WSBK Customised Full Race Air Filter for the Suzuki GSX-R1000 2009 and up.
This Race-Spec design is pre-drilled on all the flats to allow for ease of lock wiring. We recommend these are fitted dry to avoid brake fluid contamination.
Only 1 left in stock
WRS Race High Windscreen +70mm Suzuki GSX-R 1000 2017 up. Transparent
In stock (can be backordered)
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander
Only 1 left in stock
Pro-bolt Titanium rear wheel nut for Suzuki GSXR 600 750 1000 Hayabusa.
Akrapovic Racing Line (stainless steel) for Suzuki GSX-R 1000
Out of stock
Suzuki OEM spare part. 1 piece fuel pump filter oring.
In stock (can be backordered)
Set of Titanium Front Axle Pinch Bolts. High tensile 6AL-4V (Grade 5) Titanium.
Driven Racing smog engine block off plates for GSX-R1000 years 2008 up.
Out of stock
Stainless Steel Bolt Kit to replace the worn and rusty originals that pinch the fork legs together, beneath the front axle.
Pro-Bolt engine case kit bolts for GSXR-1000 2017+. Aluminum bolts direct replacement. Replaces heavy steel bolts. Aluminum is 67% lighter than Steel and results in more weight reduction.
EBC’s sintered pads deliver a much stronger initial bite than organic pads due to their high coefficient of friction and will last much longer thanks to their almost entirely metal construction. Unlike many sintered pads, Double-Hs do not contain any iron powder, eliminating the chance of a pad welding itself to the disc under corrosion.
Available on backorder
AFB CNC machined Aluminum triple clamp for Suzuki GSXR1000 2017 up.
OEM Part from Suzuki for GSX-R 1000 2017 up.
Available on backorder
OEM Swingarm bearing for Suzuki GSXR 600 750 1000. Genuine Suzuki Part. Part Number 09263-20070
Only 1 left in stock (can be backordered)
